Skip to Content
  1. All products
  2. RV Accessories
  3. Beddings Accessories
  4. Custom RV Bed Lift System
  5. Beddings Accessories
Pricelist: - Pricelist
Pricelist: - Pricelist

Custom RV Bed Lift System

In a tight interior the bed decides the whole plan: what the bench sees, where the walkway runs, how the washroom is reached. A lift turns that fixed decision into a movable one.

  • 250 x 40 x 25cm aluminium frame, 40kg
  • Weight limit of 70kg or 250kg
  • Power chosen from 12V, 220V, 24V or custom
  • Custom colour and control to suit the interior

Colour and control are both open, so the lifted frame does not have to look like machinery sitting in a finished room.

Plan it with the curtain tracks, the trims and the storage, because those all measure from where the bed finishes.

Can the control match the interior?

Yes — control is mechanical, touch or custom, and colour is custom, so both are set to the room.

$NZ 2,288.50 $NZ 2,288.50
$NZ 1,990.00

  • Brand
  • Material
  • Color - Custom
  • Power
  • Control
  • Weight Limit
  • Weight
  • Size
Add to cart
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
Contact Us
Brand: BlackM⬤A™
Material: Aluminium
Color: Custom
Power: 12V/ 220V/ 24V/ Custom
Control: Mechanical/ Touch/ Custom
Weight Limit: 70kg/ 250kg
Weight: 40 kg
Size: 250 x 40 x 25 cm
Documents
Custom RV Bed Manual.pdf

Lifting Tips:  

Step 1: Please visually and ensure that there is no one and nothing on the bed

Step 2: press the up button of the switch to move the electric lifting bed to the preset support position of the whole bed

Step 3: confirm that the electric bed has risen to the preset position

Step 4: please connect the double safety buckle of the lift bed

 

Operational Flow:

1. Press and hold the "main switch" for 2 seconds starts

2. Short press "L", the lifting bed will rise. When it rises to the limit switch, the lifting bed will stop. At this time, short press "stop"

3. Short press "down" to lower the lifting bed. When it reaches the limit switch, the lifting bed will stop. At this time, short press "stop" or delay 2 minutes to close automatically

4. After 2.5 minutes of standby on the touch panel, the main switch will be turned off automatically


Instructions:  

  1.  The electric lift bed mechanism is engineered exclusively for operation within the confines of the Car/Motorhome/Camper.
  2. It is designed to support a maximum weight of 60-70kg. 
  3. To ensure the integrity of the electric lift bed, it is imperative to utilize four brackets during the lowering process. 
  4. Prior to elevating the bed, it is essential to clear the surface of any foreign objects. Additionally, during the descent, please verify that the area beneath the bed is free from any obstructions. 
  5. The calibration of the upper and lower limits of the electric lift bed should be performed solely by certified technicians. 
  6. Furthermore, the installation of the slide rail for the electric lift must occur in a specified location to ensure optimal functionality.